5 Inch Speed Dome Installation Manual V2.0.0
33
Step3:
Install wall mount assembly
Screw four hex screws with the spring washers to the pole adapter through the wall mount and gasket.
Step4:
Install dome to the mount
Feed the cables through the opening on top of the back box, and attach the dome to the mount, and finally use M3 screws to secure the
dome. Refer to
Section 1.2
for installation instructions.
Note
:
Follow the same instructions described above for the Short-arm Corner Mount installation. For outdoor applications, please
adopt the water-proof measures. The Short-arm Wall Mount is not recommended for outdoor applications.
Summary of Contents for 5 Inch Network High Speed Dome
