GigE Line Scan Camera
·
User Manual
24
Phase A
Phase B
Line Inp ut 1
Line Input 2
Line input 1 is
selected as the
input signal for
phase A
Line input 2 is
selected as th e
input signal for
phase B
Phase A Input
Phase B Input
Shaft Encod er
Software
Module
Line Trigger
Module
Output
The final output
of module is line
trigger s ignal
Figure 7-8
Function Demonstration
The advantages of shaft encoder are as follows:
Encoder output pulse frequency is proportional to rotating speed.
The output pulse acts as a trigger signal for line scan camera.
Synchronize acquisition speed and sample movement of camera.
Non-uniform motion can also be a perfect match.
A trigger signal can be set as acquiring multiple lines or multiple frames with adjustable ratio.
Follow steps below to set shaft encoder control.
Steps:
1.
Click Encoder Control, and set Encoder Source A and Encoder Source B according to actual
demands.
2.
Set Encoder Trigger Mode.
Any Direction means that both forward and backward direction will trigger.
Forward Only mean that only forward direction will trigger.
Backward Only mean that only backward direction will trigger.
The 2K camera outputs one signal in one source signal, and the 4K and 8K cameras output four
signal in one source signal.
3.
(Optional) Regarding MV-CL021-40GM and MV-CL022-40GC cameras, you can set Encoder
Trigger Frequency to let the camera output multiple signals, including 1 Tick, 2 Tick and 4
Ticks.
Summary of Contents for MV-CL021-40GM
Page 1: ...GigE Line Scan Camera User Manual ...
Page 126: ...UD24388B ...
