HIK VISION DS-1100KI User Manual Download

Page: 84 / 116

User Manual of DS-1100KI Network Keyboard

Click the

Add Camera

key to enter the “Add Camera” interface:

Select the cameras from the list to be added to the group, and then click

Add

to add the selected cameras.

You can also set or modify the Cycle Time (1-65535s) for cameras here.

Click

Finish

to return to the “Matrix Input Group” interface, where you can view the successfully added

cameras for the current group.

Click

Save

to save the settings.

7.1.4 Monitor List

Viewing Monitor List

Click the

Monitor List

tab on the “Matrix List” interface to view the information of all monitors connected to the

current Matrix system, including the monitor ID, output type, IP address and port.

Summary of Contents for DS-1100KI





















































































































Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands

HIK VISION DS-1100KI, User Manual

Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands