HIK VISION DS-1100KI User Manual Download

Page: 22 / 116

User Manual of DS-1100KI Network Keyboard

3.2.7 Upgrading Device

Upgrade by FTP

Input the address of the FTP server and then click

FTP Upgrade

to operate the upgrade.

Note:

You must create the FTP server connection first by TFTP or WFTP in PC before operating the FTP upgrade.

Please refer to

Appendix2

for the upgrading.

If the upgrading is failed, the corresponding error message box will pop up.

Note:

When the upgrading is successful, the keyboard will restart automatically to complete the upgrade.

Upgrade by USB-flash Disk

Steps:

Insert the U flash disk to the USB interface and then click

USB Upgrade

to enter the USB upgrade interface.

Select the upgrade file from the disk and finally click

Upgrade

to start upgrading.

Note:

The upgrade file must be

digicap.dav

If the upgrading is failed, the corresponding error message box will pop up.

Note:

When the upgrading is successful, the keyboard will restart automatically to complete the upgrade.

Summary of Contents for DS-1100KI





















































































































Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands

HIK VISION DS-1100KI, User Manual

Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands