User Manual of DS-1100KI Network Keyboard
41
same settings, choose the camera and click
Copy
. You can also select
All
to copy the current settings to
all cameras.
(7)
Click
Apply
to save the current settings and
Cancel
to return to the previous interface.
3.
Configuring Manual Alarm
(1)
Click Set beside Manual Alarm to enter the Manual Alarm Settings interface.
(2)
Select the alarm output (s) for manual triggering.
(3)
Click
OK
to return to the Alarm Settings interface.
4.1.1.5
Exceptions
Configure the exception handling method (s) for each exception type.
Steps:
1.
Click
Exceptions
on the remote settings interface to enter the Exception Settings interface.
2.
Select the exception type to configure with handling method (s). The exception types include:
HDD Full:
The HDD is full.
HDD Error:
Writing HDD error, unformatted HDD, etc.
Network Breakdown:
Disconnected network cable.
IP Conflicted:
Duplicated IP address.
Illegal Login:
Incorrect user ID or password.
3.
Select the handling method (s) by clicking the checkbox (s) for the selected exception type.
Audio Warning:
Audible
beep
when an alarm is detected.
Notify Surveillance Center:
Send an exception or alarm signal to remote alarm host when an event occurs.
The alarm host refers to the PC installed with Remote Client.
Email Linkage:
Send an email with alarm information to a user or users when an alarm is detected.
Trigger Alarm Output:
Trigger an alarm output when an alarm is triggered. You can click the
Set
button to
set the alarm output (s) to trigger.
