User Manual of DS-1100KI Network Keyboard
105
Note:
This operation is valid only when the preset function is supported by the connected camera/dome.
Note:
Corresponding error message will appear on the screen when you perform wrong operation.
•
Calling a Preset by Input Channel
Steps:
1.
Input the Num + CAM keys to select the input channel.
2.
Press the Num + CALL keys to call the programmed preset.
Note:
It is invalid to input the 0+CAM keys in the current operation mode.
Note:
Corresponding error message will appear on the screen when you perform wrong operation.
8.4.4 Setting a Patrol
Select the output monitor or window and the keyboard is capable of automatically connecting with its
corresponding camera. Press the SET key on the keyboard and then press PATROL key to enter the patrol settings
interface. You are also allowed to directly select the camera by inputting Num + CAM keys and then press the SET
key to start patrol settings.
•
Setting a Patrol by Output Channel
Steps:
1.
Input the Num + MON keys to select the output channel.
2.
Input the Num + WIN keys to select the display window.
3.
Press the SET key to enter the settings interface.
4.
Press the Num + PATROL keys to enter the patrol settings interface.
5.
Input Num and press the ENTER key to set the preset number, stop time and speed respectively.
6.
Repeat Step5 to set other presets.
7.
Press the SET key again to finish the patrol settings.
