User Manual of DS-1100KI Network Keyboard
35
Configuring Motion Detection
Follow the steps to set the motion detection parameters for the Encoder device. In the live view mode, once a
motion detection event takes place, the device can analyze it and do many actions to handle it. Enabling motion
detection function can trigger certain channels to start recording, or trigger full screen monitoring, audio warning,
notify the surveillance center and so on. In this chapter, you can follow the steps to schedule a record which
triggered by the detected motion.
Steps:
1.
On the Camera Settings interface, click
Set
beside Motion Detection
to enter the Motion Detection Settings
interface.
2.
Select the camera for configuring motion detection.
3.
Click the checkbox of
Enable
item to enable motion detection.
4.
Set the sensitivity level. Up to 6 levels and OFF are selectable.
5.
Click the
Set
button beside Area Settings to set motion detection area.
6.
Click
Start Drawing
, and then use the mouse to click two points on the live view screen to draw area for
motion detection.
7.
To clear the motion detection area (s), click
Clear All
.
8.
Click the
Set
button beside Arming Schedule to configure the arming schedule of motion detection for the
current camera.
