HIK VISION DS-1100KI User Manual Download

Page: 14 / 116

User Manual of DS-1100KI Network Keyboard (V2.0)

Operator:

The operator is allowed to operate local live view, remote configuration of encoder/decoder parameters,

display of decoded video on monitor, local playback, PTZ control, AUX functions, etc.

Server:

Control the matrix system, analog matrix, analog dome and iVMS platform.

2.5 Operating Procedure

Steps:

When the keyboard has started up, it enters the following interface:

For basic keyboard operation, select the

Keyboard

icon to continue and enter the login interface.

Select

admin

on the login interface and then input the admin password (default: 12345) to enter the admin

interface of keyboard operation.

Click

Keyboard

Network

to enter the Network Settings interface.

Configure the network settings of the keyboard, including the

Port

IP address

Subnet Mask

and

Default

Gateway

, and finally click

Apply

to save the settings.

Summary of Contents for DS-1100KI





















































































































Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands

HIK VISION DS-1100KI, User Manual

Search results

Summary of Contents for DS-1100KI

Reviews:

Related manuals for DS-1100KI

Brands by name

Popular brands