User Manual of DS-1100KI Network Keyboard
102
Steps:
1.
Press the SET key to enter the settings interface.
2.
Press the Num + GROUP keys to set the group tour.
3.
Press the Num + ENTER keys to set the monitor (MON) number.
4.
Press the Num + ENTER keys to set the camera group (CAM-G) number.
5.
Repeat step 3-4 to set other monitors and camera groups.
6.
Press the SET key to finish the group tour settings.
Note:
1.
The group tour settings will not be saved after keyboard reboot. And if you press the Num + GROUP keys in
the process of setting the group tours, all previous settings will be cleared.
2.
Corresponding error message will appear on the screen when you perform wrong operation.
8.3.9 Calling a Group Tour
Multiple camera groups can be automatically displayed on related monitors respectively in tour by calling the
programmed group tour, e.g., camera group 1 on monitor 1, camera group 2 on monitor 2, etc.
If multiple camera groups are configured for the same monitor, then it is available for the display of the last
programmed camera group only.
The dwell time of group tour can be configured.
Steps:
Press the Num + GROUP to directly call the programmed group tour.
8.3.10 Operating Instant Playback
The recorded files of the previous 30 seconds can be played back via the keyboard instantly. R
Steps: