High End Systems DL.3 User Manual Download Page 333

Page: 333 / 394

CHAPTER 17

Maintenance and Troubleshooting

DL.3 Digital Light User Manual

307

Replacing the Fuse

The DL.3 has one user-serviceable fuse which controls mains voltage to the fixture.

To replace a fuse:

1. Disconnect power to the fixture. If the fixture

has been operating, allow the fixture to cool

before handling.

2. Loosen the 2 Phillips head screws on the top

cover of the connector side of the box.

3. Tilt the connector panel away from the box

4. Remove the fuse from the fuse holder.

5. Replace the fuse with a 5A, slow-blow fuse only.

6. Replace the side and top panels.

WARNINGS!
Disconnect power before servicing.
Replace fuses with the specified type and rating only.

Equipment surfaces may reach temperatures up to 130° C
(266° F). Allow the fixture to cool before handling.

Fuse

Summary of Contents for DL.3











































































































































































































































































































































































































Search results

Summary of Contents for DL.3

Reviews:

Related manuals for DL.3

Brands by name

Popular brands

High End Systems DL.3, User Manual

Search results

Summary of Contents for DL.3

Reviews:

Related manuals for DL.3

Brands by name

Popular brands