HID FARGO DTC4500e, User Manual

Page: 8 / 83

Page 8 of 83 October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC4500e Card Printer User Guide, PLT-01669, 1.0
1.2 Safety Messages (Review Carefully)
Symbol Critical Instructions for Safety purposes
Failure to follow these guidelines results in personal injury or death.
To prevent personal injury or death:
• Reference the following safety messages before performing an operation.
•
Always remove the power cord prior to performing repair procedures, unless
otherwise specified.
• Ensure only qualified personnel perform these procedures.
This device is electro statically sensitive. You may damage the device if exposing it
to static electricity discharges.
To prevent damage:
• Reference the following safety messages before performing an operation.
• Observe all established Electrostatic Discharge (ESD) procedures while
handling cables in or near the Circuit Board and Printhead Assemblies.
• Always wear an appropriate personal grounding device.
•
Always remove the ribbon and cards from the printer before making any
repairs, unless otherwise specified.
•
Remove jewelry and thoroughly clean hands before working on the printer.
This symbol warns of an electrical hazard that could result in personal injury or
death.
For safety purposes, do not use Ethernet for a direct connection outside of the
building.
1.2.1 Taiwan
繁體中文 射頻發射及安全指令 安全訊息（小心檢查）
標記 重要的安全事項說明
危險： 未按照說明安裝可能造成人員傷亡。
在可能產生潛在安全問題的地方有警示標記。
（如左圖所示）。
為了避免人員傷害，在進行有此警示標記的操作前，請先參考安全資訊提示。
為了避免人員傷害，在沒有特別說明的情況下，修理前請關掉電源開關。