HID FARGO DTC4500e User Manual Download

Page: 6 / 83

Page 6 of 83

October 2013

DTC4500e Card Printer User Guide, PLT-01669, 1.0

Specifications

The purpose of this section is to provide you with specific information on the Regulatory

Compliances, Agency Listings, Technical Specifications and Functional Specifications for the

DTC4500E Card Printer User Guide.

1.1

Regulatory Compliance

The Card Printer is listed under UL 60950-1 (2

edition) Information

Technology Equipment

File Number:

E145118

Note:

This product is intended to be supplied by a Listed Power Unit

marked Class 2 and rated for 24 V dc, 3.3A minimum.

CSA

The printer manufacturer has been authorized by UL to represent the Card

Printer as CSA Certified under CSA Standard C22.2 No. 60950-1-07 2

edition

File Number:

E145118

FCC

The Card Printer complies with the requirements in Part 15 of the FCC

rules for a Class A digital device.

The Card Printer has been tested and complies with EN300-330-1, EN300-

330-2, EN301-489-1, EN301-489-3, EN55022 class A, EN55024, EN6100-

3-2, EN6100-3-3, EN60950-1.

Note:

Based on the above testing, the printer manufacturer certifies that

the Card Printer complies with the following European Council Directives

and has placed the CE mark on the Card Printer.
LVD 2006/95/EC, EMC 2004/108/EC, R&TTE 1999/5/EC, ROHS2

2011/65/EC

Environmental

ENERGY STAR, RoHS2, China RoHS, Power supply Efficiency level V

minimum

1.1.1

Agency Listings

Emissions and

Immunity Standards

FCC Part 15 Class A, RSS-GEN, RSS 210, CNS 13438, EN55022 Class A,

EN55024, EN6100-3-2, EN6100-3-3, EN300-330-1, EN300-330-2, EN301-

489-1, EN301-489-3, GB9254, GB17625

Safety Standards

UL IEC 60950-1 (2nd edition), CSA C22.2 No. 60950-1-07( 2

edition),

EN60950-1, GB4943, CNS14336

Additional Agency

Listings

CCC, BSMI, KC

1.1.2

United States

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause

undesired operation.

Summary of Contents for FARGO DTC4500e











































































Search results

Summary of Contents for FARGO DTC4500e

Reviews:

Related manuals for FARGO DTC4500e

Brands by name

Popular brands

HID FARGO DTC4500e, User Manual

Search results

Summary of Contents for FARGO DTC4500e

Reviews:

Related manuals for FARGO DTC4500e

Brands by name

Popular brands