October 2013
Page 15 of 83
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC4500e Card Printer User Guide, PLT-01669, 1.0
2
Setup and Installation Procedures
This section describes the setup and installation for the DTC4500e Card Printer.
•
Choosing a good location
•
Follow these guidelines:
•
Place the unit in a location with adequate air circulation to prevent internal heat buildup.
•
Use the printer's dimensions as a guideline for the minimum clearances to the unit.
Note:
Allow for adequate clearance in front of the unit to accommodate the unit with its
covers open.
•
Do not install unit near heat sources such as radiators or air ducts or in a place subject to
direct sunlight, excessive dust, mechanical vibration or shock.
2.1
About Moisture Condensation
If the unit is brought directly from a cold to a warm location or is placed in a very damp room,
moisture may condense inside the unit. Print quality may be degraded.
Leave the unit unplugged in a warm, dry room for several hours before using to evaporate any
moisture.
Caution:
For safety purposes, Ethernet is not intended for a direct connection
outside of the building.
2.2
Unpacking and Inspection
While unpacking your printer, inspect the carton to ensure that no damage has occurred
during shipping. Make sure that all supplied accessories are included with your unit.
Check that the following items are included:
•
Power Supply
•
US/EU Power Cable
•
USB cable (2.0)
•
Software Installation CD
•
Card Printer User Guide
•
Warranty Statement, Compliancy Document
Summary of Contents for FARGO DTC4500e
Page 82: ......
