35
6. Distance Mode
Press the key „DIST‟ to enter the Distance Mode. There are
two pages for Distance Mode switched by soft key „F4‟. The
functions explanations are as followed:
On the First Page:
Save: save measurement
After pressing soft key „F1‟, a dialogue box of „Information‟
appears on the screen to ask you to enter „Point name‟, „Code‟
and „Target Height‟. The natural name of the point is to add „1‟ to
the previous point name. The code entered depends on your
requirements and the target height depends on facts. Press „ENT‟
to save measurement. If having not selected file at first when
pressing „Save‟ under Distance Mode, a dialogue box of „Select
File‟ will be on the screen before „information‟. You may now
select file for saving.
When the measurement is out of the scope of compensator,
the instrument will display „Tilt over!‟ and the measurement
cannot be saved.
If the measurement is saved successfully, the instrument
displays box of „Record:****** ‟ for 0.5 second and switch back
to the Distance Mode.
Meas:
Measure the distance and display SD, HD, VD
Quit distance measurement with key „ESC‟ under continue
Mode: used to select the working mode of the distance
measuring device.
Use keys ▲▼ to move the indicator „>‟ to the wanted opt.
Press „ENT‟ to save setting. When selecting Rept (repeated),
move the indicator „>‟ to it and use keys
◀▶
to choose the times for
repeated measurement. The number of times can be between 3
and 9.
On the Second Page:
Offset: Enter the off-center (eccentric) measurement
See reference in8 .Offset
Stake: Stake out distances:
Sngl
Rept 5
Cont
Track