Hi-Target ZTS-320 Series Manual Download Page 48

Page: 48 / 97

Press‟Enter‟->

Aim at the left edge and press the soft key „Enter‟.
Enter the interface of „Offset(column)—Right edge‟. Aim at

the right edge and press the soft key „Enter‟

Enter the interface of „Offset(column)—Center‟ which

displays the result of the Offset(column) measurement.

The result of the coordinate of the offset point will be

displayed on the screen, if you want to measure next point ,press

„NextP‟.If you want to save the result , press „Record‟.

Finally, press key „ESC‟ to quit column Offset measurement

Offset(colum)-Right edge
HR: 183

′

″

SD:                        4.570
HD:                        4.458
VD:                        1.004

Enter

Offset(colum)-left edge
HR: 178

′

″

SD:                        4.570
HD:                        4.458
VD:                        1.004

Enter

Offset(colum)-Center
HR: 181

′

″

N:              -4.663
E:              -0.117
Z:            -1.004                  m

B.S

Clear

Enter

Summary of Contents for ZTS-320 Series


































































































Search results

Summary of Contents for ZTS-320 Series

Reviews:

Hi-Target ZTS-320 Series, Manual, Page: 48 / 97

Search results

Summary of Contents for ZTS-320 Series

Reviews: