43
point „A0‟ to target point „A1‟ , you may measure the coordinate
of A0 through distance offset.
In order to measure the coordinate of „A0‟, enter the offset
distance„oHD‟ as shown below and measure „A1‟ under distance
offset mode. The coordinate and the horizontal distance of the
„A0‟can be displayed on the screen.
Enter the interface of „2. Offset (Dist 1)‟ from the offset
menu.
See the meaning of „+‟ and „-‟ in the diagram of
single-distance offset.
After entering the known offset distance, you can press
„ENT‟ to save the settings and enter the interface of „Offset
(Dist 1)—point‟
Offset(dist 1)-Distance
Left (-)/Right (+) OSD:
| m
Front(-)/Behind
（
+
）
OSD
B.S
Clear
Enter