58
The „stakes‟ must be set while the space can left blank.
If setting the stakes to be 12 with space left blank, then the
middle points can be staked out uniformly during the following
equidistant stakeout.
Space is the number of points staked out uniformly from the
begin to the end.
The equidistant stakeout page is as followed:
9.2.5 Entering coordinates
Sometimes, you may call a few of coordinate files when
undertaking the following measurement. You may also input the
coordinate and other information of the point manually and save
them into the coordinate file for possible calling later on.
The keys „◄►‟ is to help you to scan the data of the points.
e.g„1‟ indicates the number of the point when it is recorded
or scanned. After recording one record, press „ENT‟ to accept the
setting and enter the setting page of the next record. If you do not
need the record any more, press „ESC‟ to quit „Input coordinates‟
function. The system will now ask you to save the record. After
choosing „save‟, the record will be saved into coordinate files.
HR:
dHR:
HD:
dHD:
dZ:
Meas
Mode
T.H
N01
Equidistant-input
Stakes:
▏
Space:
B.S
Clear
Enter
P.name
：
|
Code
：
1
N
：
◄
E: ►
Z:
BS
Clear Num.
Enter