51
You can enter the coordinate of the station with the
keyboards or obtain from the coordinate files by pressing
„K.Pt‟(Known points).
Press „Input‟(soft key F1) to enter the coordinate of a
station manually.
See the reference in 4.7 entering numbers and letters to set
station.
Press „K.Pt‟ (Soft key F2) to enter the interface of a
coordinate file. Select the desired point and enter the list of
points.
Select the points with the keys „▲▼‟ and press „ENT‟ to
save your choice. If can‟t find the point, the coordinate will
remain its origin value and the instrument will display „Can‟t be
get!‟.
Press „M.Pt‟ (Soft key F3). The operation is the same as that
of „K.Pt‟
9.1.3 Setup BBS(backsight point)
Setting up BBS is to establish the relationship between earth
coordinate and instrument coordinate.
The way to call the coordinate of the backsight point from
the files is the same as that of setting up station under this
function . After entering the coordinate of the BBS,you have to
aim at the BBS to determine the azimuth.When finishing the set
of BBS ,the horizontal angle column on the screen is the earth
azimuth angle.
Setup station
PT.name
STN:
STE:
STZ:
B.S
Clear
Alph.
Enter
(A.COO)1/
COOR: 1
COOR: 2
Begin
End
View
Search