◦ If the new Smart Array is the new boot device, install the device drivers.
◦ If the new Smart Array is not the new boot device, go to the next step.
5.
Ensure that users are logged off and that all tasks are completed on the server.
CAUTION:
In systems that use external data storage, be sure that the server is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the drives as failed when the server is powered up.
IMPORTANT:
Any RAID configuration created for the HPE Smart Array MR controller is not
available to HPE Smart Array SR controllers.
Procedure
1.
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis
on page 28.
4.
on page 30.
5.
Remove the secondary riser cage
on page 33.
6.
Do one of the following:
•
Remove the primary riser blank
on page 35
•
on page 36
7.
Remove the primary riser slot blank.
8.
If installed, remove the full-height bracket from the controller.
Hardware options installation
79
