For more information, see the
HPE Persistent Memory User Guide
on the Hewlett Packard Enterprise
http://www.hpe.com/info/persistentmemory-docs
Installing HPE Persistent Memory modules
Use this procedure only for new HPE Persistent Memory module installations. If you are migrating this
HPE Persistent Memory module from another server, see the
HPE Persistent Memory User Guide
on the
Hewlett Packard Enterprise website (
http://www.hpe.com/info/persistentmemory-docs
Prerequisites
Before installing this option, make sure that you have reviewed the System requirements for HPE
Persistent Memory module support.
Procedure
1.
Observe the following alerts:
CAUTION:
DIMMs and HPE Persistent Memory modules are keyed for proper alignment. Align
notches on the DIMM or HPE Persistent Memory module with the corresponding notches in the
slot before installing the component. Do not force the DIMM or HPE Persistent Memory module
into the slot. When installed properly, not all DIMMs or HPE Persistent Memory modules will
face in the same direction.
CAUTION:
Electrostatic discharge can damage electronic components. Be sure you are
properly grounded before beginning this procedure.
CAUTION:
Failure to properly handle HPE Persistent Memory modules can damage the
component and the system board connector.
IMPORTANT:
Hewlett Packard Enterprise recommends that you implement best practice
configurations for high availability (HA) such as clustered configurations.
2.
3.
Disconnect all peripheral cables from the server.
4.
Remove the server from the chassis
on page 28.
5.
on page 30.
6.
Remove the secondary riser cage
on page 33.
7.
Open the DIMM slot latches.
8.
Install the HPE Persistent Memory module.
60
Hardware options installation
