Using an SUV cable to access USB drives in a KVM setup
The USB connectors on the SUV cable do not support USB devices that require a power source greater
than 500 mA at 5 V. When accessing this type of USB drives, such as a USB key or a USB optical drive,
use a USB hub in a KVM setup.
Procedure
1.
Connect the SUV cable to the SUV port.
2.
Connect a monitor to the video connector.
3.
Connect a USB hub to the USB connector.
4.
Connect a USB mouse to the USB hub.
5.
Connect a USB keyboard to the USB hub.
6.
Connect a USB key or a USB optical drive to the USB hub.
Processor and heatsink options
Installing the processor heatsink assembly
Procedure
1.
Review the
HPE Gen10 Servers Intelligent System Tuning
whitepaper at the following website:
http://www.hpe.com/support/ilo-docs
2. Identify the processor, heatsink, and socket components
.
3. Review the processor cautions
4. Install the processor heatsink assembly
on page 54.
Hardware options installation
53
