Herz commotherm 30 SW, Operating Instructions Manual

Page: 48 / 80

7 T-CONTROL - Time mode
48
7.10.5 Time mode
Menu structure
Overview
    
Demand active
Required temperature
Settings II
    
Maximum Time requirement
Minimum Time requirement
Requirement at Outside
temperature 1
Outside temperature 1
Requirement at Outside
temperature 2
Outside temperature 2
Switch off temperature
Term Description
Overview
Demand active
Indicates the state of the active requirement of the time mode

If the indicator lamp lights up, the requirement is activated
Required temperature Indicates the required temperature
Time program
Time 1
Three different time

time 1:

time 2:

time 3:
08:00 – 11:00 Setting up individual hot water tank loading times of every weekday.
Monday preset gets assigned to remaining weekdays
Settings I
Operation modes
- manually: fix requirement (demand temperature) during the set time
- via ModBus: requirement via ModBus during the set time (address:
45000-45022)
- weather compensated: requirement via heating curve during the set
time
Time requirement
If the heat pump works only as a heat supplier (no heating circuit
installed), the set up temperature gets supplied during the set heating
times.
Settings II
Maximum Time
requirement
The heat pump runs at the maximum must
Minimum Time
requirement
The heat pump runs at the minimum must temperature.
Requirement at Outside
temperature 1
Requirement at adjust Outside temperature 1
Outside temperature 1 Indicate at adjustable outside temperature 1
Time mode
Time program
    
Time Operation modes
Time requirement
Heat curve
    
Description
    
Indicates the state of the active requirement of the time mode
If the indicator lamp lights up, the requirement is activated
Indicates the required temperature
    
Three different time options are available:
08:00 – 10:00
15:00 – 21:00
00:00 – 00:00
Setting up individual hot water tank loading times of every weekday.
Monday preset gets assigned to remaining weekdays
    
manually: fix requirement (demand temperature) during the set time
via ModBus: requirement via ModBus during the set time (address:
45022)
weather compensated: requirement via heating curve during the set
If the heat pump works only as a heat supplier (no heating circuit
installed), the set up temperature gets supplied during the set heating
    
The heat pump runs at the maximum must temperature.
The heat pump runs at the minimum must temperature.
Requirement at adjust Outside temperature 1
Indicate at adjustable outside temperature 1
Settings I
    
Operation modes
Time requirement
Unit
Indicates the state of the active requirement of the time mode
If the indicator lamp lights up, the requirement is activated
-
°C
-
Setting up individual hot water tank loading times of every weekday. -
-
manually: fix requirement (demand temperature) during the set time
via ModBus: requirement via ModBus during the set time (address:
weather compensated: requirement via heating curve during the set
-
If the heat pump works only as a heat supplier (no heating circuit
installed), the set up temperature gets supplied during the set heating
°C
°C
°C
°C
°C