Herz commotherm 30 SW, Operating Instructions Manual

Page: 46 / 80

7 T-CONTROL - Heating circuit
46
Term Description
Parameter 2
Switching
temperature
The switching temperature is used to release the heating circuit.An
average value of the outside temperature (24h) is
Lies the average value over the set switching temperature, the heating
circuit is deactivated.
If this is not the case, the heating circuit remains activated.
Temp. increase
Setting up the temperature increase of the required temperature

Due to heat losses a surcharge to the must temperature of the
heating cicuit can be set.
Outside temp. sensor
Selection of the outside temperature sensor

No outside temperature sensor: If there is no outside temperature
sensor the heating circuit is

If multiple outside temperature sensors are installed, the desired one
can be assigned to the chosen heat circuit.

Internal modules use a common outside temperature sensor.

External modules can use an own outside temperature sensor but
also a common.
Balancing outside
sensor
Adjusting the balancing of the outside temperature

Shows the outside sensor not the correct outside temperature the
value can be adjusted
Hot water tank
priority
Activation hot water tank priority (ON/OFF)

The hot water tank is loaded prior compared to the heating circuit
Kneeling barrier
Activation kneeling barrier (ON/OFF)

During durable kneeling and beyond the heating times the heating
circuit is locked
Heat curve settings
Maximum flow set
temperature
Setting up the maximum flow temperature of chosen heating circuit.
Root point
temperature
Setting up the minimum flow temperature of chosen heating circuit
Flow temperature at
+10°C Setting up the flow temperature of chosen heating
outside temperature
Flow set
temperatureat
adjustableoutside
temperature
Setting up the flow temperature of chosen heating circuit at a adjustable
outside temperature.
Adjustable outside
temperature Setting up the outside temperatu
flow must temperature.
Actual outside
temperature
Indicates the actual outside temperature
Switch off
temperature Setting up the outside temperature regarding deactivation of the heating
circuit.
Heating circuit module
Description
          
The switching temperature is used to release the heating circuit.An
average value of the outside temperature (24h) is calculated.
Lies the average value over the set switching temperature, the heating
circuit is deactivated.
If this is not the case, the heating circuit remains activated.
Setting up the temperature increase of the required temperature
Due to heat losses a surcharge to the must temperature of the
heating cicuit can be set.
Selection of the outside temperature sensor
No outside temperature sensor: If there is no outside temperature
sensor the heating circuit is always active.
If multiple outside temperature sensors are installed, the desired one
can be assigned to the chosen heat circuit.
Internal modules use a common outside temperature sensor.
External modules can use an own outside temperature sensor but
a common.
Adjusting the balancing of the outside temperature
Shows the outside sensor not the correct outside temperature the
value can be adjusted
Activation hot water tank priority (ON/OFF)
water tank is loaded prior compared to the heating circuit
Activation kneeling barrier (ON/OFF)
During durable kneeling and beyond the heating times the heating
circuit is locked
          
Setting up the maximum flow temperature of chosen heating circuit.
Setting up the minimum flow temperature of chosen heating circuit
Setting up the flow temperature of chosen heating circuit at +10°C
outside temperature
Setting up the flow temperature of chosen heating circuit at a adjustable
outside temperature.
Setting up the outside temperature of chosen heating circuit regarding
flow must temperature.
Indicates the actual outside temperature
Setting up the outside temperature regarding deactivation of the heating
Unit
The switching temperature is used to release the heating circuit.An
calculated.
Lies the average value over the set switching temperature, the heating °C
Setting up the temperature increase of the required temperature
Due to heat losses a surcharge to the must temperature of the
°C
No outside temperature sensor: If there is no outside temperature
If multiple outside temperature sensors are installed, the desired one
Internal modules use a common outside temperature sensor.
External modules can use an own outside temperature sensor but
-
Shows the outside sensor not the correct outside temperature the
°C
water tank is loaded prior compared to the heating circuit
-
During durable kneeling and beyond the heating times the heating
-
Setting up the maximum flow temperature of chosen heating circuit. °C
Setting up the minimum flow temperature of chosen heating circuit °C
circuit at +10°C
°C
Setting up the flow temperature of chosen heating circuit at a adjustable
°C
re of chosen heating circuit regarding
°C
°C
Setting up the outside temperature regarding deactivation of the heating
°C