Herz commotherm 30 SW, Operating Instructions Manual

Page: 36 / 80

7 T-CONTROL - Hot water
36
Term Description
Circulation time
Time 1
By pressing this field, between three times can be selected.

time 1:

time 2 :17:00

time 3: 00:00
05:00 – 07:30 Setting up individual circulation times of every weekday.
Monday preset gets assigned to remaining weekdays.
Agg-Test
Loading valve (*)
Indicates the state of

If the indicator lamp lights up, the loading valve is open

Only visible, if “loading valve” is activated
Hot water tank pump (*)
Indicates the state of the hot water tank pump:

If the indicator lamp lights up, the hot water tank pump
running

Only visible, if “loading valve” is not activated in the settings
Circulation pump (*)
Indicates the state of the circulation pump:

If the indicator lamp lights up, the circulation pump is running

Only visible, if “circulation pump” is not
Load-through valve (*)
Indicates the state of the load

If the indicator lamp lights up, the load
and the hot water tank is loaded faster (= fast start)

Only visible, if “loading valve” is
Barrier times
Time 1
By pressing this field, between two times can be selceted.

time 1 :08:00

time 2: 15:00
05:00 – 07:30
Setting up individual hot water tank loading times of every
weekday, when it will be
Monday preset gets assigned to remaining weekdays.
Hot water tank module
Description
      
By pressing this field, between three times can be selected.
time 1: 05:00 – 07:30
time 2 :17:00 – 21:00
time 3: 00:00 – 00:00
Setting up individual circulation times of every weekday.
Monday preset gets assigned to remaining weekdays.
      
Indicates the state of the loading valve:
If the indicator lamp lights up, the loading valve is open
Only visible, if “loading valve” is activated
Indicates the state of the hot water tank pump:
If the indicator lamp lights up, the hot water tank pump
running
Only visible, if “loading valve” is not activated in the settings
Indicates the state of the circulation pump:
If the indicator lamp lights up, the circulation pump is running
Only visible, if “circulation pump” is not activated in the settings
Indicates the state of the load-through valve:
If the indicator lamp lights up, the load-through valve is open
and the hot water tank is loaded faster (= fast start)
Only visible, if “loading valve” is activated
      
By pressing this field, between two times can be selceted.
time 1 :08:00 – 10:00
time 2: 15:00 – 21:00
Setting up individual hot water tank loading times of every
weekday, when it will be not heated.
Monday preset gets assigned to remaining weekdays.
Unit
By pressing this field, between three times can be selected.
-
Setting up individual circulation times of every weekday. -
-
If the indicator lamp lights up, the loading valve is open
-
If the indicator lamp lights up, the hot water tank pump is
Only visible, if “loading valve” is not activated in the settings
If the indicator lamp lights up, the circulation pump is running
activated in the settings
through valve is open
By pressing this field, between two times can be selceted.
-
Setting up individual hot water tank loading times of every
-
-