Herz commotherm 30 SW, Operating Instructions Manual

Page: 41 / 80

Term Description
Room temperature
Indicates the room temperature
(visible, if a remote control is present)
Room correction Indicates the room correction
Status 2
Switching
temperature Display of the switching temperature for activating or deactivating the
heating circuit
Heating circuit mixer Indicates the state of the heating circuit mixer (OPEN/CLOSE)
Heating circuit pump Indicates the state of the heating circuit pump
Screed days
Setting up the heat day of the screed drying

Only visible, if operation mode “screed
Relative humidity
Indicates the relative humidity (only if active humidity measurement
selected)
Dew point
Indicates the dew point temperature (only if active humidity
measurement selected)
Operation modes
Heating circuit Activation heating circuit (ON/OFF)
Operation modes
Selection operation modes:

Heating time mode:
During the setted heating
temperature".Outside the heating times, the heating circuit operates on
the "kneeling temperature"

Durable heat:
Durable heat:Constant heat up to required room must temperature or to
the calculated flow must

Durable kneeling:
Always heat to the kneeling temperature or during the kneeling time to
the calculated flow must temperature.

Flow fixed:
During the set heating times the set flow fixed temperature is kept
constant.

Remote control:
Mode according to the setting of the remote control.Only available, if
remote control is connected.The operation of the remote control is
described on page

Screed drying:
Mode for screed drying: The operation of the screed drying is described
on page 43.
Actual heating circuit
mode
Indicates the actual operating mode of the heating circuit
Remote control
number
Selection of heating circuit´s remote control
Balancing room
sensor
Setting up room sensor balancing
Shows the outside sensor not the correct outside temperature the value
can be adjusted.
T-CONTROL - Heating circuit
Description
Indicates the room temperature
(visible, if a remote control is present)
Indicates the room correction
          
Display of the switching temperature for activating or deactivating the
heating circuit
Indicates the state of the heating circuit mixer (OPEN/CLOSE)
Indicates the state of the heating circuit pump (ON/OFF)
Setting up the heat day of the screed drying
Only visible, if operation mode “screed drying” is activated
Indicates the relative humidity (only if active humidity measurement
the dew point temperature (only if active humidity
measurement selected)
          
Activation heating circuit (ON/OFF)
Selection operation modes:
Heating time mode:
During the setted heating times, the room is heated to the "room
temperature".Outside the heating times, the heating circuit operates on
the "kneeling temperature"
Durable heat:
Durable heat:Constant heat up to required room must temperature or to
the calculated flow must temperature.
Durable kneeling:
Always heat to the kneeling temperature or during the kneeling time to
the calculated flow must temperature.
Flow fixed:
During the set heating times the set flow fixed temperature is kept
control:
Mode according to the setting of the remote control.Only available, if
remote control is connected.The operation of the remote control is
described on page 42.
Screed drying:
Mode for screed drying: The operation of the screed drying is described
.
Indicates the actual operating mode of the heating circuit
Selection of heating circuit´s remote control
Setting up room sensor balancing
Shows the outside sensor not the correct outside temperature the value
can be adjusted.
Heating circuit module
7
41
Unit
°C
°C
Display of the switching temperature for activating or deactivating the
°C
Indicates the state of the heating circuit mixer (OPEN/CLOSE) -
-
-
Indicates the relative humidity (only if active humidity measurement
%
°C
-
-
times, the room is heated to the "room
temperature".Outside the heating times, the heating circuit operates on
-
Durable heat:Constant heat up to required room must temperature or to
-
Always heat to the kneeling temperature or during the kneeling time to
-
During the set heating times the set flow fixed temperature is kept
-
Mode according to the setting of the remote control.Only available, if
remote control is connected.The operation of the remote control is
-
Mode for screed drying: The operation of the screed drying is described
-
-
-
Shows the outside sensor not the correct outside temperature the value
°C