7.5 Code – entry
If entering the code, the following operations can be performed:
Setting up values
Activation of the aggregate-test (see chapter
Setting up or changing of date & time (see chapter
Navigation in the menu settings (see chapter
Navigation 1:
Screen:
figure 7.4: Code - entry
By pressing the button:
figure 7.5 is displayed.
the main menu will be displayed
(if you have already
code, the control will be locked)
the previous page will be
displayed
T
operations can be performed:
test (see chapter 7.4)
Setting up or changing of date & time (see chapter 7.6)
Navigation in the menu settings (see chapter 7.11)
Navigation 2:
Screen:
entry
figure 7.5: Code
Note:
is displayed.
Enter the corresponding code (see below) and press
„OK“ to confirm.
the main menu will be displayed
(if you have already entered a
code, the control will be locked)
Code:
the previous page will be
the open padlock-icon appears:
T-CONTROL
7
21
: Code - entry
Enter the corresponding code (see below) and press
111
icon appears:
Summary of Contents for commotherm 30 SW
