7.11.7 Server settings
Navigation:
Screen:
By pressing the button:
smtp.1und1.de
the mail server address can be entered (=outgoing mail server)
touch@herz-
energie.at
the boiler’s E-
Password
the password can be entered
touch@herz-
energie.at
the username can be entered
SSL
the encoding can be chosen (no, SSL, TLS)
Note:
To send mail at the adjusted values (error, warning, information according to chapter
heat pump has to have a valid E-mail address.After the successful creation of an E
up the figure 7.33exemplified values shown in .
Look up the data of the mail server and the port number at your provider (for e
After successful configuration of the mail server settings the heat pump will send E
values
T
figure 7.33: Server settings
the mail server address can be entered (=outgoing mail server)
-mail address can be entered
the password can be entered
the username can be entered
the encoding can be chosen (no, SSL, TLS)
To send mail at the adjusted values (error, warning, information according to chapter
mail address.After the successful creation of an E-ma
exemplified values shown in .
Look up the data of the mail server and the port number at your provider (for example GMX).
After successful configuration of the mail server settings the heat pump will send E
T-CONTROL
7
67
the mail server address can be entered (=outgoing mail server)
To send mail at the adjusted values (error, warning, information according to chapter 7.11.5, Seite64), the
mail address you can set
xample GMX).
After successful configuration of the mail server settings the heat pump will send E-mail with the set up
Summary of Contents for commotherm 30 SW
