Hermstedt WebShuttle II, Manual

Page: 54 / 66

48 LED signals
To use one of the HermstedtWAN lines for the Dial-Up Server, you
have to set an MSN/Subaddress for incoming calls. This is set in the
control panel
ISDN System Manager , details can be found in section
‘MSN Settings’ on page 36.
Then choose the menu option Connection | Dial-Up Server in the
Dial-Up Networking window. Windows’ online help gives you more
information on this topic.
4.3 LED signals
Your WebShuttle II has two LEDs informing you of the current
state of your WebShuttle II . Inside the ISDN port is an orange-
coloured LED, at the other side a yellow LED.
The yellow LED is lit
WebShuttle II has just been connected properly to the computer.
The yellow LED is lit and the orange-coloured LED is pulsing
WebShuttle II is ready to be used. There is currently no active con-
nection.
The yellow and the orange-coloured LEDs are lit
There is an active connection. Three seconds after establishing a con-
nection a single blinking of the orange-coloured LED shows a 1-chan-
nel-connection, blinking twice a 2-channel-connection.