Hermstedt WebShuttle II, Manual

Page: 17 / 66

Installation 11
plug of the WebShuttle II starts pulsing. For a quick try-out see ‘The
first connection’ on page 13.
2.3 Installing the software for Windows 98 and Me
After you have connected the WebShuttle II to your computer, the
Hardware Wizard of Windows started automatically. It then tried to
activate the necessary driver software.
In addition to the USB software for the WebShuttle II you have to
install the software needed in order to use Dial-Up Networking. The
following steps show you this process in detail.
Your screen shows the first dialogue of the Hardware Wizard.
1. Insert the “WebShuttle II CD” into your CD-ROM drive and wait a few
seconds until the CD-ROM is mounted.
2. Select Automatic search for a better driver and click Next.
If for any reason you like to install the drivers manually: You find
them in the directory “D:\English\Win98” respective
“D:\English\WinMe.” Replace “D:” with the drive letter of your
CD-ROM drive.
The wizard now copies the necessary driver files to your hard disk.
Have your Windows CD-ROM at hand, as the Hardware Wizard
will probably need to install some additional Windows files as well.