Hermstedt WebShuttle II, Manual

Page: 42 / 66

36 ISDN S
YSTEM
M
ANAGER
Almost ever the caller ID is the same as the MSN, that is your phone
number without area code, or part of it, like an extension number
assigned with a PBX system.
Check “same number for all outgoing calls” and enter a phone number
as caller ID, if all calls made with this adapter should originate from
the same phone number.
Initialize Adapter
This button allows to “restart” the ISDN adapter and initialize its
basic software. If you think a connection “hangs” and nothing goes
anymore, you may try this before restarting your computer.
Bootloader Update
Some ISDN adapters have integrated firmware in addition to the nec-
essary driver software of the operating system. This firmware may be
upgraded using this button. The content of a file from the software
installation is copied into an internal memory chip. This upgrade is a
special action and should be done on demand only.
During the update you must not unplug the USB cable of a
WebShuttle II . The device may get damaged. Its two LEDs are
blinking rapidly during this process.
4.1.4 MSN Settings
For each adapter this list shows the MSN/subaddress combination
incoming calls are accepted for. You may choose each single adapter
from the topmost list and then change its configuration.
Normally, you don’t need to provide a caller ID at all. However, if your
adapter is connected to certain PBX’s, to make a call, you’ll need to enter the
extension number of the PBX’s ISDN line.