Servicing the device
58
Replacing a defective protection glass
WARNING
Heat is generated during the operation of the device.
Touching the device at the front can lead to severe burns.
Always let the device cool down for 5 to 10 minutes
before mounting or removing components.
To replace the protection glass, proceed as follows:
Switch off the device.
Remove the light shaping tool (see page 31).
Remove the defective protection glass (see page 29).
Mount the new protection glass (see page 29).
Mount the light shaping tool (see page 31).
Switch on the device.
Summary of Contents for FORIS 1000
Page 72: ......
