Hensel-Visit FORIS 1000, User Manual

Page: 49 / 72

Operating the device
49

Use the rotary switch to select “ON” or “OFF”.

Briefly press the rotary switch once.
The corresponding value is saved.
To activate the time for the model light reduction (Autored), proceed as
follows:

Use the rotary switch to highlight the “Autored Time Min” menu item.

Briefly press the rotary switch once.

In two-minute increments, set the time up to a maximum of 60 minutes
using the rotary switch.

Briefly press the rotary switch once.
The desired value is saved.
To activate type of the model light reduction (Autored), proceed as
follows:

Use the rotary switch to highlight the “Autored Power” menu item.

Briefly press the rotary switch once.

Select 50% or “OFF” using the rotary switch.

Briefly press the rotary switch once.
The desired value is saved.
Checking the function of the model lamp
When the model light is on, the display shows “High” or “Prop”. If this is
not the case, proceed as follows:

Press the LAMP button.
The display shows “High” and the model light lights up.

If the model light does not light up, contact Customer Service (see page
71).