Operating the device
47
Activating and deactivating the model light
“Full” mode
To activate the model light in “Full” mode, proceed as follows:
Briefly press the LAMP button.
The display shows “Full”. The model light lights up with maximum
brightness, irrespective of the set flash energy.
To deactivate the model light in “Full” mode, proceed as follows:
Press the LAMP button again twice.
“Prop” mode
To activate the model light in “Prop” mode, proceed as follows:
Press the LAMP button twice.
The display shows “PROP”. The brightness of the model light is
proportional to the set flash energy.
To deactivate the model light in “Prop” mode, proceed as follows:
Briefly press the LAMP button.
Alternatively, you can switch the model light on and off in the “Mode”
submenu.
Press the LAMP button once and keep it pressed.
The “Lamp” submenu is displayed (see page 48).
Summary of Contents for FORIS 1000
Page 72: ......
