Operating the device
51
To activate and deactivate the photo cell, proceed as follows:
Briefly press the SYNC button.
The photo cell is activated.
Press the SYNC button again three times.
The photo cell is deactivated.
Alternatively, you can switch the photo cell on and off in the “Sync”
submenu.
Press the SYNC button once and keep it pressed.
The “Sync” submenu is displayed (see page 52).
Activating and deactivating the radio receiver
The device has a built-in “Hensel IO” radio receiver. With the optionally
available radio remote trigger, the camera and flash can be synchronized
via radio signal. To activate and deactivate the radio receiver, proceed as
follows:
Briefly press the SYNC button twice.
The radio receiver is activated.
Briefly press the SYNC button twice.
The radio receiver is deactivated.
Alternatively, you can switch the radio receiver on and off in the “Sync”
submenu.
Press the SYNC button once and keep it pressed.
The “Sync” submenu is displayed (see page 52).
Summary of Contents for FORIS 1000
Page 72: ......
