Operating the device
54
Making settings in the “Mode” submenu
To make settings in the “Mode” submenu, proceed as follows:
Use the rotary switch to highlight the “Mode” menu item in the main
menu
Briefly press the rotary switch once.
The last values set are displayed:
Mode:
Set STD, FREEZE, FP or TTL mode
Sequence:
Set the number of flashes for the flash
sequence
Sync Delay ON/OFF:
Activate and deactivate the sync delay
Sync Delay:
Set the sync delay
The sync delay can only be set in “Expert” mode. For more
information, see the separate instructions.
To change the values, proceed as follows:
Use the rotary switch to highlight the “Mode” menu item.
Briefly press the rotary switch.
Use the rotary switch to select “STD”, “FREEZE”, “FP” or “TTL” mode.
Briefly press the rotary switch.
The corresponding value is saved.
To exit the “Mode” submenu, press the Back button.
Summary of Contents for FORIS 1000
Page 72: ......
