Hensel-Visit FORIS 1000, User Manual

Page: 53 / 72

Operating the device
53

Proceed in the same way when setting the channel.

Observe and follow the instructions of the radio remote trigger.

To exit the “Sync” submenu, press the Back button.
Selecting operating modes
To select the operating modes, proceed as follows:

Briefly press the MODE button.
The FREEZE mode is activated.

Press the MODE button twice.
The FP mode is activated.

Press the MODE button three times.
The TTL mode is activated.

Press the MODE button four times.
The STD mode is activated.
Alternatively, you can select the operating modes in the “Mode” submenu.

Press the MODE button once and keep it pressed.
The “Mode” submenu is displayed (see page 54).