Hensel-Visit FORIS 1000, User Manual

Page: 43 / 72

Operating the device
43
Operating the device
Activating and deactivating the device

To turn on the device, press and hold the power button.

To turn off the device, press and hold the power button again.
Triggering a test flash
To trigger a test flash, proceed as follows:

Make sure the “Ready” LED display lights up green.

Briefly press the TEST button.
The device releases a flash.
Setting the flash energy
The flash energy can be adjusted with the rotary switch. The setting range
depends on the selected operating mode (see page 53). To set the flash
energy, proceed as follows:

To increase the flash energy, turn the rotary switch clockwise.

To decrease the flash energy, turn the rotary switch counterclockwise.
When the flash energy is changed, the “Ready” LED display goes out until
the selected flash energy is ready.
When the flash energy is reduced, the previously accumulated energy
is released internally using the integrated APD function.