Commissioning the device
23
Commissioning the device
To commission the device, proceed as follows:
Remove the transport cap (see page 24).
Dismantle the flash tube with protection glass (see page 26).
Install the illuminant for the model light (see page 27).
Mount the flash tube with protection glass (see page 26).
Mount the light shaping tool (see page 29).
Connect the mains cable (see page 31).
Turn on the device at the main switch (see page 36).
Trigger a test flash (see page 36).
Check the function of the model light (see page 37).
Summary of Contents for Certo 200
Page 56: ......