Hensel-Visit Certo 200, User Manual

Page: 9 / 56

Safety
9

Check the device annually for operating safety (see the maintenance
schedule on page 45).

Regularly clean the outside of the device with a dry cloth.

Have damaged cables and the device replaced immediately by the
authorized Customer Service only.
Prevention of serious injuries due to fire
When the flash tube is triggered, sparks might arise, which could lead to
fire. Serious injuries can result.

Do not use the device in the vicinity of flammable materials such as
decorative materials, paper, etc.

Do not store flammable materials such as decorative materials, paper,
etc. in the vicinity of the device.
Prevention of serious skin and eye injuries
Triggering a flash in the direct vicinity of the eyes can result in skin and eye
injuries.

Observe the required minimum distance for the type of light shaping
tool and flash intensity.

Do not look into the light shaping tool in case the flash is triggered
accidentally.

In case of skin or eye injuries, consult a doctor immediately.
Prevention of the risk of burns
Heat is generated during the operation of the device. This heat can heat up
the flash tube, model light, protection glass and light shaping tool,
resulting in burns in case of contact with the skin.

Always handle the device with gloves according to EN 407 during
operation.

Always let the device cool down for 5 to 10 minutes before mounting or
removing components.
Prevention of ozone formation
When using the device in enclosed spaces, ozone can form.

To prevent an increased ozone concentration, vent enclosed spaces
regularly.