Mounting and removing components of
the device
29
Mounting the light shaping tool on/removing it from the
device
WARNING
Heat is generated during the operation of the device.
Touching the device at the front can lead to severe burns.
Always let the device cool down for 5 to 10 minutes
before mounting or removing components.
IMPORTANT!
When mounting or removing the light shaping tool on and
from the device, the protection glass can be damaged.
Do not touch the protection glass with the light shaping
tool.
Make sure the device is held firmly when mounting and
removing the light shaping tool.
When mounting the light shaping tool, place it evenly
onto the device.
When mounting and removing the light shaping tool,
hold it firmly with one hand.
Summary of Contents for Certo 200
Page 56: ......