Henny Penny PFE-591, Operator'S Manual

Page: 52 / 73

Model PFE- 591
Language (SP-2)
a. Follow steps 1 and 2 above.
b. Press and release button. “SP-2” and
“LANGUAGE” flashes on the display, along with the
language (Ex:” 1.ENGL”)
c. To toggle to the desired language, press and release .
System Initialization (SP-3)
This step resets the controls, but doesn’t erase product settings.
a. Follow steps 1and 2 above.
b. Press and release twice. “SP-3” and “DO
SYSTEM INIT” flashes on the display, along with “INIT’.
c. Press and hold . “INIT” shows on the display,
a tone sounds, and “IN 3”, “IN 2”, “ IN 1” flashes on the
right side of the display. When “INIT” starts flashing on
the left side of the display, release . When “ DONE”
shows on the display, the initialization is complete, and
the controls now have factory preset parameters.
Audio Volume (SP-4)
The volume of the speaker can be adjusted.
a. Follow steps 1 and 2 above.
b. Press 3 times. “SP-4” and “AUDIO VOLUME”
flashes on the display, along with the volume value.
c. Press to adjust the speaker volume; 10
the maximum value and 1 the minimum.
Audio Tone (SP-5)
The tone of the speaker can be adjusted.
a. Follow steps 1 and 2 above.
b. Press 4 times. “SP-5” and “AUDIO TONE (HZ)”
flashes on the display, along with the tone value.
c. Press to adjust the tone of the speaker; 2000 the
maximum, 50 the minimum.
3-36 403
3-16. SPECIAL PROGRAM
MODE (Continued)