Henny Penny PFE-591, Operator'S Manual

Page: 37 / 73

Model PFE- 591
3-10. CHANGING THE FILTER 8. Remove the filter clips and discard the filter envelope.
ENVELOPE (Continued)
9. Clean the top and bottom filter screen with soap and
water. Rinse thoroughly with hot water.
Be sure that the filter screens, crumb catcher, filter clips,
and the standpipe are thoroughly dry before assembly of
filter envelope as water will dissolve the filter paper.
10. Assemble the top filter screen to the bottom filter screen.
11. Slide the screens into a clean filter envelope.
12. Fold the corners in and then double fold the open end.
13. Clamp the envelope in place with the two filter retaining clips.
14. Replace the crumb catcher screen on top of the filter paper.
Screw on the suction standpipe assembly.
15. Place complete filter screen assembly back into filter drain pan,
replace clean crumb basket, and slide pan back into place
beneath the fryer.
16. Connect the filter union by hand. Do not use a wrench to
tighten.
17. Slide the condensation drain pan back into place. The
fryer is now ready to operate.
703 3-21