Model PFE- 591
3-15. PROGRAMMING
1.
Press and hold for one second until “PROG” shows
in the display, followed by “ENTER CODE”.
2.
Enter code 1, 2, 3. “SELECT PRODUCT…PRESS
PROG” scrolls across the display.
3.
Press and release the desired product button (1 to 10).
If no buttons are pressed within approximately 2 minutes
while in the Program Mode, the controls will revert back
to the Cook Mode.
Press to copy a product, erase a product, preset a
product, erase all products, or preset all products. See
Copy/Erase Pre-Set Products Section.
4.
Press and release
. The name of that product
shows in the display. Ex. “ NAME“FRIES”.
Change Product Names
a. Press and release and the first letter, or digit,
starts flashing.
b. Press and release to change the flashing letter.
c. To continue to the next letter, press
. Then press
to change this letter.
d. Repeat step c until up to 7 letters are entered.
e. Press and hold
to exit Program Mode, or press and
release until “PRELOAD” shows in display, to
continue with Program Mode.
5.
The Preload Mode allows the operator to drop large pieces
first, with the lid up, before loading the rest of the product.
The preload cycle always runs without pressure and which
always regulates to the Step 1 cook temperature. Press
to set a preload time, or press if no
preload is desired.
703
3-29
Summary of Contents for PFE-591
