4
1 Please observe the following
For safe and successful operation of the unit, read these instructions completely. The
manufacturer cannot be held responsible for damage or injury of any kind because of misuse or
improper application or because of failure to observe safety instructions or warnings.
Be sure to retain this manual for future reference.
1.1
Emphasized Sections
Warning!
Refers to safety regulations and requires safety measures that protect the operator or other
persons from injury or danger to life.
Caution!
Emphasizes what must be done or avoided so that the unit or other property
is not damaged.
Notice
Gives recommendations for better handling or adjustment of the unit during operation as well as
for service activities.
1.2
Items Supplied
1 EQ PR10.1 DLP 3D Printer
1 Base Frame or Cabinet
1 Safety Basin
1 Starter kit
–
Including:
•
1 Spatula
•
1 Resin Puller
•
1 Resin Curing Flash Light
•
1 Resin Basin
•
1 Build Platform
•
1 Nitrile Gloves
•
1 Spray bottle
•
1 Funnel with filter
1 Operating Manual
1 PC Software on USB flash drive.
1 Power cord
1 Lens Cap
Notice
Illustrations and descriptions in this instruction manual can deviate in detail from the actual unit
delivered, due to ongoing upgrades.
1.3
Field of Application (Intended Usage)
The Loctite PR10.1 DLP 3D Printer is designed for use with Loctite 3DP resins.
The Loctite PR10.1 can print parts with complex geometries which would be impossible using
traditional manufacturing techniques.