13
4.6
Assembling the Basins
If the tilt blocks are not yet preassembled on the basins, the safety basin (white silicone used to
bond the glass to frame) and the resin basins (black silicone used to bond glass to frame) must
be assembled prior to use.
To assemble the basin:
1.
Unpack the box containing the basin, tilt blocks, screws and pins.
2.
Lift the basin from the box by holding the aluminum rim and place it down on a clean
paper towel.
3.
Screw the tilt blocks into the frame of the basin. Position the holes in the tilt blocks
towards the back of the basin.
The basins are identifiable by the color of the anodization.
The clear anodization indicates it is a resin basin and has a PTFE coating.
The black anodization indicates it is a safety basin, with no PTFE Coating.
DO NOT INTERCHANGE THE BASINS.
•
Do not drop the box containing the basin.
•
Do not drop the basin.
•
Never touch the inside of the basin with your bare hands.
•
Never touch the bottom of the basin with sharp or pointed objects.
•
Do not place the basin with the glass flat on a surface. Always place it upside down or
on a clean paper towel.
•
Do not rub the bottom of the resin basin to clean it.
