5
1 Please observe the following
1.4
For Your Safety
Request the technical data sheet and the safety data sheet for the LOCTITE
®
product used at
FOLLOW UNCONDITIONALLY THE INSTRUCTIONS OF THESE DATA SHEETS!
WARNING
!
For safe and successful operation of the unit, read these instructions completely.
If the instructions are not observed, the manufacturer can assume no responsibility.
Removing, bypassing or putting out of operation safety devices can result in damage to persons
and damage to the unit and is therefore prohibited!
Damage to the power cord or the housing can result in contact with live electrical parts. Check
the power cord and the unit before each use. If the power cord or the unit is damaged, do not
operate! Replace a damaged power cord with a new one.
The unit may be opened and repaired only by authorized service personal.
Avoid contact with chemicals and wear protective clothing, gloves and goggles.
Do not look directly at Projector-UV light, or at projector-UV light reflected by a reflective
surface. Doing so could cause eye damage.
Always wear UV blocking eye protection when operating this machine.
Never operate this product any way other than described in this manual. Doing so risks exposure
to LED-UV light.
Any defects found must be reported immediately! Remedy any defects immediately!
Use only original replacement and spare parts. Henkel cannot be held responsible for damage or
injury of any kind because of failure to observe the instructions in this Operating Manual.
Mechanical parts are moving slowly but with high forces and rigidity. Keep hands out of the
printer when the axis in moving.
The printer is a tall and heavy part. Make sure it stands well and cannot fall over. Take care when
installing or transporting it. Make sure it is well fixated on the base cabinet with the included
screws.
