Henkel Loctite EQ PR10.1 DLP Operating Manual Download Page 29

Page: 29 / 42

5.2.4.3

Model Properties

This panel gives you access to different functions and properties for modelling a print.

Remove

Remove the model from the work area

Support

Add manual support

Grid Support

Add grid support

Mirror

Mirror selected model

Categorised

Categorise the models

Alphabetical

Place the models in alphabetical order

Properties Window

Show the properties of the models

Colour

Change the colour of the model. The colour of the model aslo
indicates the following:

•

Red

–

Almost flat surface (between 175 and 185 degrees)

•

Orange

–

Small angled surface (between 150 and 210

degrees)

•

White

–

When placing a grid support a surface can turn

white. The white overlay shows the area that will be filled
with support cones.

All Axis Locked

When True, the model will be scaled by the same factor in all axis.

Factor

The scaling factor

Cone Distance

The distance between the grid support cones (mm)

Cross Support

Place the grid support in a square or as a cross grid

Internal Support

Generate support cone(s) that do not touch the build platform

Support Basement

Add a support basement. A support basement makes the model
easier to release

–

Support

Generate support cone(s) on the lowest points of the model.

Summary of Contents for Loctite EQ PR10.1 DLP











































Search results

Summary of Contents for Loctite EQ PR10.1 DLP

Reviews:

Related manuals for Loctite EQ PR10.1 DLP

Brands by name

Popular brands

Henkel Loctite EQ PR10.1 DLP, Operating Manual

Search results

Summary of Contents for Loctite EQ PR10.1 DLP

Reviews:

Related manuals for Loctite EQ PR10.1 DLP

Brands by name

Popular brands