30
5.2.4.4
Support Properties
This panel gives you access to different functions for creating and placing support cones.
Remove
Remove the support cone from the work area
Save
Save the support properties as the default properties. When new
support cone(s) are added to the model, these settings will be
used.
Apply
Apply these support properties to the support cones
Categorised
Categorise the support cones
Alphabetical
Place the support cones in alphabetical order
Properties window
Show the properties of the support cones
Bottom Height
Height of the bottom cone structure
Bottom Radius
Radius of the bottom of the cone structure
Middle Radius
Radius of the middle of the cone structure
Top Height
Height of the top of the cone structure
Top Radius
Radius of the top of the cone structure
Total Height
Total height of the support cone
Colour
•
Grey
–
Non-selected support cone(s)
•
Selected/Highlighted single support cone
•
Selected grid support cone(s)
Bottom Width Correction
Cone Distance
Gap between support cones in a grid support
Cross Support
Enable/Disable cross support
5.2.5
Total Number of Models
This shows the number of models in the work area.
5.2.6
XYZ Orientation
The XYZ orientation helps determine which axis to use when manipulating a model.
