20
5.
The assembly is now in position. With one hand, raise the build platform up to the top
position and tighten the front facing allen key screw. Do not tighten the build platform in
the extended position, it must be at minimum extension for the calibration of the print
tray that follows.
4.11
Aligning the Build Platform
To produce accurate prints, the build platform needs to be aligned with the basin.
To align the build platform:
1.
Ensure that the build platform and basin are clean.
2.
Move the build platform the top position
–
this is done by
entering the ‘Controls’ screen
from the settings menu.
3.
Loosen the 4 screws holding the ball joint so the build platform can freely move in an
angular direction.
Receiving Slot
