23
5 Loctite Operator Station PC Software
The Loctite Operator Station PC software is used to create print job files to be used for
downloading to your Loctite PR10.1 Printer.
5.1
Installing the Software
To install the Loctite Operator Station PC software on a computer, follow the steps below:
The computer requires a Windows 10 operating system.
1.
Insert the supplied USB flash drive into your computer
2.
Navigate to the USB flash drive
3.
Open ‘Setup.exe’
4.
Follow the on-screen instructions on the installation wizard.
5.
You will be prompted to request a license activation key to complete the installation. To
do this copy the text in the box and email it to [email protected]
6.
You will receive an email reply which will contain the activation code. Click on the
‘Activation Code’ tab at the bottom of this popup and copy the activation code into the
box. Then press ‘OK’
